 
|
LIFT-N-WEIGH
FORKLIFT SCALES &
LOADER SCALES |
|
| LNW
4 Options |
|
RS232
Output: Includes
Rear mounted Four (4) pin Receptacle w/screw on Dust Cover; matching
Four (4) pin cable connector, rubber boot, cable clamp; Internal wiring
for wiring RS232 and 11 VDC to the output receptacle.
List Price: $202.50
|
|
Tape
Printer: in Separate Enclosure - 6" x 6" x 4" NEMA 4 enclosure; window in lid; Two
(2) quick release clamps to open hinged cover for access to 2.25" wide
by 2.75" D paper tape; dot matrix printer w/cartridge type ribbon. The
Printer includes as standard: Time & Date and Sequential
Numbering; the RS232 option listed above; 6' Connecting Cable
with military style Four (4) pin cable connectors, rubber boots, cable
clamps for connection to a LNW 4. Additional cable length can be
purchased for $1.00 per foot.
|
|
Set
Point Control: A
single set-point control system with a Three (3) pin receptacle, rubber
boot, cable clamp; Internal wiring for the 10A SPDT relay to
the output receptacle (NO, NC, COM); matching Three (3) pin cable
connector, rubber boot, cable clamp.
List Price: $202.50
|
|
Dual
Calibration: Provides
the ability to calibrate the LNW 4 in two (2) separate lift cylinder
stages: e.g. The operator could obtain a weight in the 1st stage (low
to the ground) and in the 3rd stage (high up) - a safety feature to
prevent tipping. This option includes a manual switch on the case to
select which stage to display.
List Price: $130.00
|
|
Dual
Calibration Switch receptacle: The
system can automatically setup 2-stage calibration by customer
providing a switch fastened to the upright and activated by the movable
section. When the 2nd weighing stage is reached, it would switch the
second calibration point. Calibration would switch back to first
selected stage when the moving portion passes the switch on the way
down. Switch would have to be a SPST. A receptacle w/10' of cable will
be provided..
List Price: $90.00
|
|
Additional
Hose length: $9.00 per foot above the
standard 6' hose
|
|
For further information
contact LNW Tech Support at 1-800-537-1886
Or email: tech@forkliftscales.us
|
|
